Instructions

inter
BHH
8141-108.01
Thermosocket
with
external
sensor
Before
using
the controller,
please
read
the following
instructions
carefurrv
Hffy3:3'i31ii'
ELEKTptozUtEgl-lörc
Temperature
dial knob
lr
t.
,t.
Ä.
trq{*ti
-
r,,,
:**
.1:tt
,j,
Power
On
/Off
Switch
fiil[ilil[
tgr c&
CI
Operation:
l.Connect
the device
and set the POWER
switch to On.
2.Select
the desired
temperature with
the temperature
selection
knob
by
pressing
the
turn clockwise
or counterclockwise. You
can turn
your
Set desired
temperature
between 5'C
(40'F)
-
30"C
(85'F).
3.Connect
your
device
to the socket
on the
front
side. e.g.
portable
heater,
portable
air
conditioning,
etc.
4.lf
the
setting is
set to heat
the
LED light
will turn
green
to
request
heat,
if
the
room
temperature is below
the desired temperature
setting. lf
the room
temperature has reached
the set desired
temperature. The
heater
switches
off and the LED light
turns red.
S.When
the setting is
set
to
"Cool"
the LED light is
green
to indicate
that
a
room
temperature
above the set desired
temperature
to request
an air
conditioning
unit.
lf
the
room
temperature
exceeds
the set has reached
the desired temperature. The
air conditioning
switches
turns off
and the
LED light
turns red.
Setting:
1
,Unplug
the
power
cord and turn the unit to the back of the
device.
There is
a cover
on the upper
right
side.
There
is a
switch that allows
you
to switch between
heating and
cooling. The factory
default setting
is
"heat".
2. After
setting the HeaUCold switch, close the
Close cover tightly for
safety reasons!
inter BAR
GmbH
+
www.
interbaer.de
-
Cc
KG
*
Halverstraße
[e-mail]
-
Operating voltage: 230V
AC/
50Hz;
-
load
(max.)
6A 3680W
-
resistive
load;
9A@CosO=0.4
-
inductive
load
-
Operating temperature:
5'C
-
70'C
-
Temperature
control range: 40"F
(5'C)
-
85'F
(30'C)
Accuracy:
t1'C;
I MPORTANT
SAFETY PRECAUTIONS
Do
not use
an extension cable.
Do
not
plug
in
any device
that
has
a mechanical
movement,
directly into
the temperature
controller.
Fans
or
other equipment with
exposed
elements should
not
be
left
unattended
and
it
is recommended
that this type
of equipment is not
connected
to
the temperature
controller.
Do
not insert needles
or other metal
objects into
the
power
outlet.
Avoid humidity, e*reme
temperatures, shocks and
vibrations.
Only
use the
devices indoors
and do
not
expose them
to
the sun.
The recommended
ambient temperature
is 1OoC
to
40oC
Do not
open the temperature controller.
Repairs
may only be
carried out by authorized service
personnel.
Use a soft cloth to clean
the
housing
and display.
Do not
use any chemical
or abrasive agents. Do not
immerse in
water.
Keep
the device out of the reach
of children.
43
*
5857t
Schalksmiihi*
-
Tel
023551f
Q3-il
f:3'?'-;
i7
1!120