Instructions / Assembly

Please read carefully and save these instructions

Don't discard any of the packaging until you are sure that you have all of the parts and the fitings

IMPORTANT

1. DO NOT lay cabinet on tiled or concrete surface prior to installation

Cabinet must be on protected surface to prevent chipping of the corners

2. Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may

be concealed.

INSTALLATION

Please refer the installation diagram on installations manual.

1)Unpack all the packaging, take out the mirror cabinet, and put it together to measure the total

size of the mirror cabinet combination

2) Level and mark the cabinet's location on the wall.Drill holes,and put in the plastic expansion

bolt,then fix the aluminum bar by screws(See Pic.2&Pic.3);

3) Hang the cabinet on the wall; don't remove your hands until its safety.

4) Connect the lower end of wall with the cabinet body by using the coner brace.

MAINTENANCE

Wipe clean with a soft damp cloth. Apply glass cleaner to cloth and do not apply directly to mirror

INSTALLATIONINSTRUCTIONS

INSTALLATION MANUAL

PAGE 1
INSTALLATION MANUAL INSTALLATIONINSTRUCTIONS Please read carefully and save these instructions Don't discard any of the packaging until you are sure that you have all of the parts and the fitings IMPORTANT 1. DO NOT lay cabinet on tiled or concrete surface prior to installation Cabinet must be on protected surface to prevent chipping of the corners 2. Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may be concealed.
PAGE 2
3 2
PAGE 3
4 5 3
PAGE 4
6 4