Installation Guide

Interbuild Hardwax Oil Specifications

English

DIRECTIONS:

1. Stir the can well.

2. Apply evenly and thoroughly with a roller/brush.

4. Prior to re-coating lightly sand with #400 grit sand paper.

5. Repeat steps 1-4, allow 72 hours drying prior to normal use.

Our Foodsafe Hardwax Oil for Countertops, Chopping Boards and

Butcher Blocks is a premium quality wood oil especially formulated to use on

wooden countertops, butcher blocks, chopping/cutting boards and other wood

applications which require a food-contact safe finish, yet easy to apply and

maintain.

After fully dry, it meets Non-Toxic European Standard EN71 P3, and

Germany’s Food-Contact Safe Regulation LFGB and complies to FDA

standards as well.

Please contact customerservice@interbuild.eu for details on the LFGB and

FDA test certificates and on finishing steps to meet LFGB as well as for

downloads of the MSDS and Technical Data sheets. Please also see

Directions/ Instructions in leaflet at bottom of can, before use.

PREPARATION: Prepare the wood for finishing by sanding with #180 and then

#240 grit sand paper in the direction of the grain. Before applying oil, remove all

sanding dust, dirt, grease or glue with a vacuum and rug.

3. Wipe off lightly any excess with a soft and clean cloth; allow 6-12 hours dry

time before each re-coating.

6. Always use a soft sponge with light detergent to clean the surface once dry.

On final products, DO NOT IMMERSE IN WATER and DO NOT WASH IN

DISHWASHER.

APPLICATION TIPS: Apply at room temperature (20-30

C).The oil finish is a

ready to use product. Do not thin. If desired, use additional coats to build a

finish.

If your product frequently will be exposed to Acetic Acid (like Vinegar), top up

with 1 or 2 coats of Interbuild-Adora Hardwax Clear Oil to improve the colour

fastness in such an environment. On a darker colour finish, apply Clear

Hardwax Oil with 2-3 coats.

PAGE 1
Interbuild Hardwax Oil Specifications English Our Foodsafe Hardwax Oil for Countertops, Chopping Boards and Butcher Blocks is a premium quality wood oil especially formulated to use on wooden countertops, butcher blocks, chopping/cutting boards and other wood applications which require a food-contact safe finish, yet easy to apply and maintain. After fully dry, it meets Non-Toxic European Standard EN71 P3, and Germany’s Food-Contact Safe Regulation LFGB and complies to FDA standards as well.
PAGE 2
COVERAGE: 1 can 250 ml (12.7oz) covers 8-10m2 (86-108 sft). Very high solid content (90 % vegetable oils and waxes) with very low (nonaromatic) VOC <10%, hence the high coverage / yield with low evaporation of fumes! CLEAN UP of tools: USE mineral spirits CARE: All wood oils will dry with time and depending on the frequency for use of the product. For countertops, re-oiling once or twice per year should be sufficient. For chopping boards more often.