User's Manual

Managing

Computer

Ethernet

cable

Managed

Ethernet

cable

Ethernet

Hub/Switch

Ethernet

cable

Fig. 2: Connecting a managing computer and the IEEE 802.11b/g via Ethernet

You can use either a cross-over Ethernet cable (included in the package) or a switch/hub with two

normal Ethernet cables.

NOTE: One connector of the Ethernet cable must be plugged into the LAN0 IEEE 802.11b/g port for

configuration.

2.4. Configuring the AP

After the IP addressing issue is resolved, launch a Web browser on the managing computer. Then, go

to “http://192.168.0.1” to access the Web-based Network Manager home page.

TIP: The IEEE 802.11b/g can be reached by its host name using a Web browser. For example, if the

IEEE 802.11b/g is named “AP”, you can use the URL “http://AP” to access the Web-based Network

Manager of the IEEE 802.11b/g.

2.4.1. Entering the User Name and Password

Before the start page is shown, you will be prompted to enter the user name and password to gain the

right to access the Web-based Network Manager. For first-time configuration, use the default user

name “root” and default password “root”, respectively.