User's Manual

3.6.2. Management

3.6.2.1. UPnP

Fig. 57. UPnP settings.

UPnP (Universal Plug and Play) enables a Windows XP user to automatically discover peripheral de-

vices by HTTP. When the UPnP functionality is enabled, you can see the AP in My Network Places

of Windows XP. The AP can be given a friend name that will be shown in My Network Places. Dou-

ble-clicking the icon in My Network Places that stands for the AP will launch the default Web

browser for you to configure the AP.

3.6.2.2. System Log

Fig. 58. System log settings.

System events can be logged to the on-board RAM of the AP (Local log) or sent to a remote com-

puter on which an SNMP trap monitor program runs (Remote log by SNMP trap). See the next sub-

section for more information about SNMP trap settings.

The system events are divided into the following categories:

 General: system and network connectivity status changes.

 Built-in AP: wireless client association and WEP authentication status changes.

 MIB II traps: Cold Start, Warm Start, Link Up, Link Down and SNMP Authentication

Failure.

 RADIUS user authentication: RADIUS user authentication status changes.

NOTE: The SNMP Authentication Failure trap is issued when using an incorrect community string to

manage the AP via SNMP and the SNMP MIB II OID, snmpEnableAuthenTraps, is enabled (dis-

abled by default).