User Manual

Technical Manual for Master Terminals of the Series IF 152x
Page 6
Display and Operating Units
7
4
1
C
8
5
2
0
9
6
3
E
F 1 F 2 F 3 F 4
* # 14: 47
?
XXXXXXXXXXX
1
2
3
5
6
5
4
A B
C D7 57
1 Keys for scrolling accounts during info bookings and for forwarding dialog menus during cost
center bookings.
2 Softkeys/ function keys, locked or not locked
3 Numeric keys for additional entries
4 Display 4x 20 digit
5 Correction/ clear key
6 Enter key
7 Key with fixed function
A Date
B * sign for indicating main power off or Accumulator low or lithium battery low
C # sign for indicating autonomy or offline mode
D Time
Softkeys/ Function Keys (2)
These keys can be parameterized as "locked" or "not locked". If the keys are "locked", the last basic
function selected will remain active and will also be indicated on the display (a). If the keys are "not
locked", the respective booking type must be selected each time a booking is to be carried out.
Clear Key (5)
This key has two functions. 1 x C deletes the current entry, 2 x C cancels the entry and then the basic
menu is displayed again.
Enter Key (6)
With this key, manual entries can be confirmed and the user can move on to the next dialog level.
Function Keys with Fixed Programmed Function (7)
These keys are configured with following functions: IN, OUT, CLOCKING IN AND OUT REASON,
INFO.