User Manual

Technical Manual for Master Terminals of the Series IF 152x
Page 36
How to Exchange the Firmware/ Application Software
The master terminal requires the following software for operation:
• Firmware with terminal functions (terminal firmware)
• Controller software (MPU board) consisting of:
- Application software
- Operating system software
- Network software
Each software version has its own number which gives information on the respective software
release. It can be polled via service/test interface or via TELNET with OC menu $ cfg
OC Menu to Recall Software Version
Show controller application software, operating system software Network software.
$ cfg -v
Software configuration IF1xxx
-----------------------------
BSystem_DM: OS9 3.03 V01.00.0
TcpIp_DM: Ethernet Tcp/Ip V01.01.0
Downl_DM: Download module V01.00.0
ReadMe_DM: V5.10.8c
Show terminal software
$ cfg
Terminal configuration IF1xxx 5.10.8c16 (software version) Host: Ethernet
No B A HA TNo type HWU SWU display keys read1 read 2 In/ Out
1 1 A 1 1 IF 625 2.01 - - - - -
How to Exchange the Controller Software
The controller software can be loaded via the respective host interface. The housing does not have to
be opened. Alternatively, loading is also possible via the service/test interface*.
The following is required for loading:
• PC with:
- Operating system WIN 95, NT or newer.
- At least 12 MB free memory on the hard disk.
- COM interface and service cable or Ethernet interface.
• Download program IF 1XXX.
• Current controller software.
The procedure is described in a separate manual.