User's Manual

-13-
you need to use a network barring code, which can be obtained from the network operator. If the code is
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
 Hide ID: You can select hide ID, display own ID and or display ID by network.
 Others: You can set call time minute reminder, auto redial, reject by SMS, Any-key answer and Auto
record voice call through this function.
Phone settings
 Date & time:set the time, set the date, Set the date format, the time format and update time of the
location.
Note: If you remove the battery from the mobile phone or if the battery energy was exhausted a long
time ago, you may need to reset the date and time when re-inserting the battery or powering on the mobile
phone after recharging.
 Language settings:Select the display language and writing language for the mobile phone.
 Shortcut settings:Select preferred function as shortcut on screen direction key as needed
 Auto power on/off :Set the time when the mobile phone will be automatically powered on or off.
 Power management:you can turn on this option to save power and you also can make some settings
 Restore factory settings:You can cancel the setting you set. The original code is 1234.