Assembly Instructions

1
2
4
IG
Assembly Instructions1-800-645-2986
L
OFFICE PARTITIONS
11
Circuit 1 Circuit 2 Circuit 3 Circuit 4
Isolated
Receptacle
Removal Tool is
required when
removing
receptacles from
power box.
Each power box
accepts up to 6
simplex receptacles;
3 per side.
M
The power system is an eight wire system
consisting of four circuits. Each circuit is
rated at 20 amps/120 volts maximum. Circuit
1 (black), Circuit 2 (red) and Circuit 4 (pink)
share a common neutral (white) and ground
(green) while Circuit 3 (blue) has an
individual neutral (gray) and ground
(green/yellow). Circuits rated at 20 amps/120
volts, or as permitted by local codes.
CONNECTING POWER SOURCE
SIMPLEX RECEPTACLE TYPES
Maximum 16 simplex receptacles per 15 amp circuit.
Maximum 20 simplex receptacles per 20 amp circuit.
Connect starter
cable to power box
STEP 1
STEP 2
Use either a 15
or 20 AMP
circuit to
supply power
Have a
licensed
electrician
install a hard
wired
connection.
(20 AMP STARTER)
(15 AMP CIRCUIT 1)
(20 AMP CIRCUIT 1)
Blank
Installation using
power pole.
Power pole not
included.
Use blank to fill
“empty” simplex
locations on
power box.
OR
OR
WARNING
Office Partitions With Electric 4/16/10 3:17 PM Page 12