Assembly Instructions

globalindustrial.com
Office Partitions With Electric
Assembly
Instructions
Customer Service
1-800-645-2986
WARNING
In order to prevent structural failure, instability, tip-
over, and/or serious injury, please follow instructions
carefully.
• Use only the instructions, parts and
hardware included
• Maximum span for connected
panels without support is 12 feet
• Do not move panels while they are connected together
• Maximum span for connected
panels using overhead cabinets or
shelves without support is 12 feet
• Consult licensed electrician for
proper installation
Adjust all levelers to
approximately 1-1/4”
HARDWARE
ASSEMBLY
• Configurations require the corresponding
steps needed for proper assembly.
• Attach appropriate brackets or legs on
the ends of the panels as needed.
• Do not attach bolts or brackets into the
outermost edge of a panel that will be
last in line.
• Starter panel should use a corner,
3-way, 4-way, or wall bracket.
• Insert bolt cap into unused threaded
insert to finish your project.
• Level each panel as you go along.
12’
12’
1
1
2
IG
4
H1 H2
H3 H4
H5
H6 H8
H9 H10
H11 H12
H13
H14 H15
Straight Connector 3-way ConnectorWall Bracket Corner Connector 4-way Connector Bracket 90˚ Connector
Screw Toggle BoltT-Bracket Straight Extension Hex Bolt
Threaded Stud Panel Filler Cap
H16 H17
H18
H19
H20 H21
Aluminum PlatePanel Filler Post Bolt Cap Screw 36” Power Box 48” Power Box
H22 H23
H24 H25
H26
H27 H28
Raceway Cover 72” Starter Cable60” Power Box Panel Raceway 144” Starter Cable 20 AMP Plug 15 AMP Plug
H29 H30
H31 H32
H33
H34 H35
Circuit 1 Circuit 2
Extended/Corner
Cable
Circuit Tool Circuit 3 (IG) Circuit 4 Blank
H36 H37
H38
3-Way CapEnd Cap Corner Cap
12’
12’
Overhead
Cabinets
Overhead
Shelves
Office Partitions With Electric 4/16/10 3:17 PM Page 2