ASSEMBLY GUIDE L-Shaped Electric Height Adjustable Table Models 695777 and 695778 Read this manual thoroughly prior to installation, operation or maintenance. Keep these instructions in a safe location for future reference. For questions, visit globalindustrial.com or contact Customer Service at 1-800-645-2982.
ASSEMBLY GUIDE Table of contents 1. General • 1.1 About this manual • 1.2 Intended use 2. Safety Information • 2.1 Informal safety measures • 2.2 Use of the adjustable frame • 2.3 Specific Dangers • 2.4 In an emergency • 2.5 Maintenance • 2.6 Cleaning 3. Packaging • 3.1 Part Check List • 3.2 Screw List 4. Assembly • 4.1 Torque Guide • 4.2 Assembly Step by Step 5. Operating Instructions • 5.1 Zero Setting • 5.2 General Operation • 5.3 Container and Shelf Stop postion • 5.
ASSEMBLY GUIDE 1. General 1.1 About this user manual The guiding principle for safe use and trouble-free operation of this adjustable frame is the knowledge of basic safety information and regulations. This user manual includes the most important information needed for assembling and operating the adjustable frame safely. More importantly, the safety information about the adjustable frame must be observed at all times. 1.2 Intended use Please observe the provision of section 2, Safety Information.
ASSEMBLY GUIDE 3.
ASSEMBLY GUIDE 3. Packaging 3.2 Screw List M6x12 (18 Pcs) M8X12 (4 Pcs) Feet ST 4.
ASSEMBLY GUIDE 3. Packaging 3.2 Screw List Remote Control Matching Screw (2 Pcs) 1 ST 4.2x19 2 3 M3.5X12 4 5 Before attempting assembly of the Height Adjustable Frame, please read safety information in Section 2.
ASSEMBLY GUIDE 4. Assembly 4.1 Assembly Step by Step M6x12 Step 1 Step 2 Assemble the middle Leg and Bracket as illustrated above. Please refer to Torque Guide. Mount the Adjustment Feet to the middle Leg as illustrated above. Please punch in, do not use a hammer. ST 4.8x19 M6x12 Step 3 Step 4 Use screws to fix connection plate and table top. Please refer to Torque Guide. Assemble the Top Frame and Leg as illustrated above. Please refer to Torque Guide.
ASSEMBLY GUIDE 4. Assembly 4.1 Assembly Step by Step M6X16 M6x12 Step 7 Assemble the middle Leg and 3rd Leg End Pipe as illustrated above. Please refer to Torque Guide. Step 8 Mount the Feet as illustrated above. The smooth side of the plate faces the foot. Please refer to Screw Part List Select the appropriate feet and the matching screw. Please refer to Torque Guide . ST 4.8x19 Step 10 Step 9 Mount the Frame to the Table top and fix the Top Frame as illustrated above. Please refer to Torque Guide .
ASSEMBLY GUIDE 4. Assembly 4.1 Assembly Step by Step ST 2.9X16 Step 14 Step 13 Mount the Remote Control to the Table top as illustrated above. Please refer to Screw Part List Select the appropriate feet and the matching screw. Please refer to Torque Guide. Perform Zero Setting. 5. Operating Instructions Please read below instructions carefully before operating the system. S Setting Button 1 Memory Position 1 2 Memory Position 2 3 Memory Position 3 Up Down 5.
ASSEMBLY GUIDE 5. Operating Instructions 5.2 General Operation: This function enables you to adjust the frame upwards or downwards. Press or button and keep pressing the button until the required frame height is reached. The frame will continue moving upwards or downwards until you release the button or the maximum / minimum height is reached. 5.3 Container and Shelf Stop position: T he s e two fe a ture s c a n be us e d to limit the move me nt a re a of the de s k top (e .g.
ASSEMBLY GUIDE 6. Programmable Remote Control Operating Instructions The following actions should only be performed by properly trained personnel. 6.1 Enter the setting menu Follow the instructions below to enter the setting menu to change the settings for the control unit. • • • • Press the “S” button five seconds. The display will read “S – X”. The display will start flashing. Press the “S” button to enter the setting. 6.
ASSEMBLY GUIDE 6. Programmable Remote Control Operating Instructions 6.6 Changing the desktop height displayed Follow the instructions below to change the height shown on the display but not the actual position of the desktop. • • • • Within the setting menu choose “S – 5”. Press the “S” button to enter the setup menu. Press the “S” button to finish the setup. 6.7 Run automatically with memory position.
ASSEMBLY GUIDE 7. Troubleshooting In this section you will find detailed information on the following topics: • Possible faults and remedies • Error messages on the remote control display 7.
ASSEMBLY GUIDE 7.
ASSEMBLY GUIDE 7.