Assembly Instructions

Assembly Instructions Instrucciones de Ensamblaje Directives d’assemblage
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
092520
1
1
5
3
4
6
2
1
Interion
®
Tractor Stools
1. Remove base, pneumatic cylinder, seat, foot ring
(if included) and caster/glides from box.
2. Place base (1) upside down and insert casters/glides
(5) (see figure 1).
3. Slide optional foot ring (4) over pneumatic cylinder
from bottom (2) about halfway up the cylinder and
tighten knob (6).
4. Flip the base so casters/glides are on the floor and
insert pneumatic cylinder (2) as shown in (figure
2) into center hole of base with colored button up.
Lightly push down. Adjust foot ring to desired height
5. Align the center hole of the underside of the seat
assembly (3) with the top of the pneumatic cylinder
(2) and lightly push down. With the weight of your
body carefully sit on the seat. This will press the
base, pneumatic cylinder, and seat together.
6. To raise the height of your stool, take your weight off
of the stool and pull on the ring on the underside of
the seat and adjust.
7. To lower the height of your stool you must be seated
with your weight on the seat - lift up on the ring.
Models
B2304237 B2280965 B2385439 B2385441 B2385443
B2304238 B2280966 B2385438 B2385440 B2385442
B2304239 B2280967 B2385435 B2385437 B2385445
B2304240 B2280968 B2385434 B2385436 B2385444
Base
Base
Base
Casters/Glides
Seat
Pneumatic
Cylinder
Knob
Foot Ring
(optional)
Fig. 1
Fig. 2
Shown with
Chrome Base