- Interlink Electronics Multimedia Projector Operator's Guide X70/X80

Other Care

WARNING • Please carefully read the “Product Safety Guide”.

• Before caring, make sure the power switch is off and the power cable is not

plugged in.

• Be cautious of high temperature. Do not touch about the lens and ventilation

openings during use or immediately after use prevent a burn.

• Never try to care for the inside of the unit yourself. Doing so is dangerous.

• Do not use cleaner or chemicals other than those listed below, including benzene and

paint thinner.

• Do not use aerosols or sprays.

CAUTION

• Incorrect care could have adverse influence such as discoloration,

peeling paint, etc.

Caring For The Inside Of The Projector

In order to ensure the safe use of your projector, please have it cleaned and inspected by

your local dealer about once every 2 years.

Turn off the projector, and unplug the power cord.

Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch

the lens directly with your hand.

Caring For The Lens

Turn off the projector, and unplug the power cord.

Wipe lightly with gauze or a soft cloth.

memo If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,

and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

Caring For The Cabinet And Remote Control

• Do not polish or wipe with hard objects.

NOTE