GE Magnetic Contacts 1038 Series Surface Mount with Wire Leads Gap Distance Closed Loop 1" 1038 Color Quantity White, Mahogany Brown 10 100% 1038-N TESTED
1038 Series Surface Mount with Wire Leads Installation Instructions 1. Clean mounting surfaces with alcohol pad (included). 2. Align and attach mounting plates for the switch and magnet using tape or screws (included). Wire may be routed on either end or through the top of the switch housing cutouts. 3. Strip loop wire and connect the leads to the alarm loop. 4. Place switch and magnet covers over the center of the mounting plates and slide either left or right until the cover snaps in place. 2.26" (5.
