Installation Instructions

UL Specifications
Part Loop Electrical Gap Distance Magnet
Number Type Configuration (Up To)
*
Length
1125 Closed N.O.
1
/ 4 "
3
/ 4 "
1125W Closed N.O.
3
/ 4 "
3
/ 4 "
*
Gap Specifications are nominal and may vary ± 20%. Gap Specifications are for switch to make.
Break distance is approximately 1.1 to 1.5 times make.
**
European Union Specifications: 48 V AC/DC max, 0.5 Amp
**
FORM A (1125, 1125W)
Voltage: 100 V AC/DC max
Current: 0.5 A max
Power: 7.5 W max
WARNING: Each electrical rating is an individual maximum and cannot be exceeded!
C-UL Specifications
All Contacts: 30 VDC, 50 mA max Gap Specifications:
*
See UL Gap Specifications
1125 Series
3
/8" Diameter Stubby Press Fit with Wire Leads
Installation Instructions
Drill Mounting in Wood
Drill
3
/8" diameter holes
3
/4" deep for both the contact and the magnet. Press them
into their respective holes.
Mounting in Aluminum Sliding Windows and Doors
Do not overdrill. Attach contact and magnet with RTV mounting compound or epoxy.
PK-0984 Rev G 07/02
.75"
1.90 cm
Magnet
Part No. 1946
(included)
.44"
1.11cm
.75"
1.90 cm
www.GE-InterlogixSecurity.com 2266 Second Street North
North St. Paul, MN 55109
Phone: [phone]
USA & Canada: 800-777-5485
Technical Service: 800-777-2624
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: [phone]
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
GE Interlogix
Made in Taiwan