User Manual

Page 1
2-Button Keychain Touchpad
ν Keychain Touchpads are learned into the Panel as
sensors or wireless touchpads.
ν Each learned Keychain Touchpad uses one of the
available sensor numbers or one of the four wire-
less touchpad numbers.
For example, if a CareTaker Plus system (32
zones) has six Keychain Touchpads learned as
sensors, 26 available sensor numbers remain.
ν Keychain Touchpads learned as sensors are pro-
grammed into unsupervised groups (since they
don’t send supervisory signals) that determine
how the Panel responds when both Keychain
Touchpad buttons are pressed together.
ν When learned as sensors, Keychain Touchpads
can be bypassed or deleted. This helps prevent
lost or stolen Keychain Touchpads from operating
the system.
ν Keychain Touchpads learned as sensors use the
sensor number as the user number for central sta-
tion reports that include a user number.
ν All Keychain Touchpads learned as touchpads in
CareTaker Plus and Security Pro 4000 systems
report to the central station as user number 41.
For Commander 2000 and Security Pro 2000 sys-
tems, Keychain Touchpads report as user number
20. These touchpads cannot be bypassed, but they
can be deleted.
Tools Needed
ν Phillips screwdriver (for removing and replacing
the Panel cover or battery door)
Learning Keychain Touchpads into
Panel Memory
This section describes how to learn Keychain Touch-
pads into Panel memory for CareTaker Plus, Security
Pro 4000, Commander 2000, and Security Pro 2000
Panels.
CareTaker Plus and Security Pro 4000
To learn Keychain Touchpads as sensors:
1) Disarm the system to level 1.
2-Button Keychain
Touchpad
Document Number: 46-897 Rev. A
January 1995
INSTALLATION
INSTRUCTIONS
About This Document
This document describes how to install and operate
the 2-Button Keychain Touchpad.
Product Summary
The Keychain Touchpad is an alkaline battery-pow-
ered, wireless touchpad designed to fit on a keychain,
in a pocket or purse. It provides users a convenient
option for the following system operations:
ν Arming the system
ν Arming the system with no delay
ν Disarming the system
ν Police Panic alarm
Installation Guidelines
Use the following guidelines when adding Keychain
Touchpads to the system:
ν CareTaker
®
Plus and Security Pro 4000 Panels
must have software version 3.0 (or later) installed
for Keychain Touchpad operation.
ν Commander
®
2000 and Security Pro 2000 Panels
must have software version 4.0 (or later) installed
for Keychain Touchpad operation.
60-607