Spec Sheet

AR2000 Series
IFS Audio Transmitter/Receiver
and Transceiver
IFS
®
Line / Fiber Transmission
interlogix.com
OVERVIEW
The IFS AT/AR1000 Series audio transmitter and receiver provide
one-way transmission of an audio signal on one optical fiber.
udio transceiver provide
The IFS AR2000 Series a s bi-directional
transmission of one audio signal on one or two optical fibers. The
modules use frequency modulation (FM) for superior transmission
of balanced or unbalanced line-level audio (2.2V peak-to-peak).
Models within this series are available for use with multimode
or single mode optical fiber. Plug-and-play design ensures ease
of installation requiring no electrical or optical adjustments. The
modules incorporate power and carrier detect status indicating
LED’s for monitoring proper system operation. The modules are
available in either stand-alone or rack mount versions.
APPLICATION EXAMPLES
• Transmission of Stage Mics from Pre-amp to Amplifier
• Recording Studios and Post-Production Facilities
• Transmission of Broadcast Audio Feeds
• Elimination of EMI/RFI Interference in Audio Cables
• Optical Isolation for Elimination of Ground Loop Noise
SYSTEM DESIGN
STANDARD FEATURES
• FM Audio Transmission
• 20 Hz – 20 kHz Bandwidth
• 600 Ohms Audio Input Impedance
• Transmits Balanced or Unbalanced Line-Level Audio
(2.2 Volts Peak-to-Peak)
• No In-field Electrical or Optical Adjustments Required
• Power and Carrier Detect Status Indicating LEDs to Monitor
System Performance
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses on all Power Lines
• Meets NEMA TS-1/TS-2 & Caltrans Specifications (Temperature/
Humidity, Shock/Vibration, and Voltage Transient Protection)
• Distances up to 30 miles (49km) without Repeaters
• Comprehensive Lifetime Warranty
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [e-mail]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Specifications
Audio
Input/Output Signal: 2.2 volts pk-pk
Input/Output Impedance: 600 ohms (Single ended or differential)
Bandwidth: 20 Hz - 20 KHz
Total Harmonic Distortion: <1.0%
Signal-to-Noise Ratio (SNR): 60 dB min.
Wavelength ATAR1000,2000: 850 nm, MM AR2010WDMA: 850/1310, MM
All Others Models: 1310 nm
Number of fibers 1 or 2
Connectors
Optical: ST
Power and Audio: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Sur face Mount: 12 VDC @ 200 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Sur face Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
Part Number
Optical Pwr. Budget
Max. Distance*
Multimode
62.5/125μm**
Single Mode
9/125μm
2.8 miles (4.5 km)
2.8 miles (4.5 km)
2.8 miles (4.5 km)
2.8 miles (4.5 km)
2.8 miles (4.5 km)
10 miles (16 km)
10 miles (16 km)
30 miles (49 km)
PS-24VACCT 24 Volt AC Center Tap Power Supply
PS-24VACCT-230 24 AC Center Tap Power Supply 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
AT1000
AR1000
AR2000
AR2010WDMA
AR2010WDMB
AT1020
AR1030
AT1025
AR1030
AR2025
1
1
2
1
1
1
1
Fibers Required
16 dB
17 dB
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth.** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
©
All accessories are third party manufactured.
Audio Transmitter ((850 nm)
Audio Receiver (850 nm)
Audio Transceiver (850 nm)
Audio Transceiver (850/1310 nm)
Audio Transceiver (1310/850 nm)
Audio Transmitter ((1310 nm)
Audio Receiver (1310 nm)
Audio Transmitter ((1310 nm)
Audio Receiver (1310 nm)
Audio Transceiver (1310 nm)
Accessories
©
Options
Description
Mic
Pre-Amp Amp
up to 2.8 miles
(4.5 km)
1 Fiber
62.5/125µm MM
AT1000
AR1000
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
System Design
Ordering Information
Agency compliance
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
AT/AR1000 &