Installation Manual Instruction Manual

Chapter 3: Programming
Concord 4 Installation Manual 35
Figure 27: Programming touchpad
Programming touchpad
Programming touchpad
connector
Programming touchpad cable (60-791)
In program mode, touchpad buttons let you navigate to all installer programming
menus for configuring the system. Table 8 below describes the touchpad button
functions in program mode.
Table 8: Touchpad programming functions
Button
Programming function
#
Select menu item or data entry.
*
Deselect menu item or cancel data entry (if pressed before #).
A ()
B ()
Scroll through available options at the current menu tier. Also, scroll
through sensor text options during sensor text programming.
C
Enter pauses when programming phone numbers.
D
Delete certain programmed settings.
0 to 9
Enter numeric values wherever needed.
1 and 2
Select off (1) or on (2) wherever needed.
1 to 6
Press and hold to enter alphabetical characters A through F for
account numbers
7 and 9
Press and hold to enter * (7) or # (9) for phone numbers.