Installation Manual Instruction Manual

Concord 4 Installation Manual iii
Important information
Intended use
Use this product only for the purpose it was designed for; refer to the data sheet
and user documentation for details. For the latest product information, contact
your local supplier or visit us online at www.utcfireandsecurity.com.
Changes or modifications not expressly approved by UTC Fire & Security can
void the user’s authority to operate the equipment.
About this manual
This manual provides information for planning, installing, programming, and
testing this security system. Planning sheets are included for you to record
hardware layout and software programming settings.
Use this manual for the following panels:
600-1021-95R
Concord 4 RF
600-1022-95R
Concord Express V4
600-1040
Concord Commercial V4
600-1042
Concord Hybrid
When necessary, this manual refers you to other documentation with compatible
peripherals.
The Concord 4 User Manual (P/N 466-2183) contains user worksheets that you
should fill out during the installation and programming of the system. For
multiple-partition systems, we suggest a user manual for each partition.
Read these instructions and all related documentation entirely before installing or
operating this product.
Note: A qualified service person, complying with all applicable codes, should
perform all required hardware installation.