Installation Manual Instruction Manual

Chapter 3: Programming
84 Concord 4 Installation Manual
User codes menu
The user codes menu lets you program/change regular user access codes,
partition master codes, and the system master code. You can enter up to 230
separate user codes, allowing up to 230 different users access to the security
system. You can also specify whether a specific user is able to perform specific
actions, like bypassing sensors or testing the system.
User nnn
Shortcut: 030nnn0,
where nnn is user
number 000 to 229
Default: None
User codes provide basic arming and disarming functions. The system
allows up to 230 user codes (user numbers 000 to 229). User numbers
that show **** indicate no code is currently programmed for that
user number.
To program regular user codes:
1. With the display showing USER CODES, press # and the display
shows REGULAR USER CODES.
2. Press # and the display shows USER nnn (first available user
number).
3. Press A or B to select the desired user number, then press #. The
display shows USER nnn - nnnn.
4. With the user number displayed, enter a four-digit user code. The
display flashes the entered code. Press # and the display shows USER
nnn - nnnn (new code).
To delete regular user codes:
1. With the display showing USER CODES, press # and the display
shows REGULAR USER CODES.
2. Press # and the display shows USER nnn - nnnn (first
available user number).
3. Press A or B to select the user number/user code you want to delete
(if it is not already displayed), then press #. The display shows USER
nnn - nnnn.
4. Enter the system or partition master code. The display flashes the
entered code. Press # and the display shows USER nnn -- ****
(no code).