Installation Manual Instruction Manual

Chapter 3: Programming
Concord 4 Installation Manual 89
Set up schedules
Shortcut: 05XXY,
where XX is schedule
00 to 15 and Y is start
(0)/stop (1) Monday to
Sunday (2 to 8)
Default: 00:00
This menu lets you set up start/stop times for each day of the week.
Schedules used by one partition cannot be viewed or changed from a
different partition.
If you are programming schedules for your customer, be sure to record
the settings in the Concord 4 User Manual.
To set up a time schedule:
1. Press A or B until the display shows SET UP SCHEDULES.
2. Press # and the display shows SCHEDULE 00. If you want a
different schedule number, press A or B until the schedule number
appears.
3. Press # and the display shows START TIME hh:mm (current
setting).
4. Enter the starting time (00:00 to 23:59). The display flashes the
entered time. Press # and the display shows START TIME hh:mm
(new setting).
5. Press B and the display shows STOP TIME hh:mm (current
setting).
6. Enter the desired stop time (00:00 to 23:59). The display flashes the
entered time. Press # and the display shows STOP TIME hh:mm
(new setting).
7. Press B and the display shows MONDAY OFF/ON (current
setting). To select a different day, continue pressing B until the desired
day appears.
8. Press 1 (off) or 2 (on). The display flashes the entered selection.
Press # and the display shows the new setting for the selected day.
9. Repeat the process until all desired settings for each day are set.