Data Sheet

D
2300CPS
Series
IFS RS-485 Siemens Cerberus
Pyrotronics Repeater
IFS
®
Line / Fiber Transmission
interlogix.com
STANDARD FEATURES
• MXL Network (RS-485)
• CXL Modem Link (FSK)
• Data Re-clocking
• Drop and Repeat Network Architecture
• Automatic Resettable Solid-State Current Limiters
• Tested and Certified by an Independent Testing Laboratory for Full
Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMATS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• No In-field Electrical or Optical Adjustments Required
• Power, Transmit and Receive Data Status LED Indicators
• Data rates up to 200 kbps
• Distances up to 25 Miles (40 km)
• Comprehensive Lifetime Warranty
DATA
MXL Network
Data Interface: RS-485 (CSMA/CD)
Data Rate: 19.2 kbps
CXL Modem Link
Total Network
Pulse Distortion: <1 µs
WAVELENGTH 850 nm, Multimode
1310 nm, Multimode or Singlemode
NUMBER OF FIBERS 2 In/2 Out
CONNECTORS
Optical: ST
Data and Power: Terminal Plug with screw clamps
ELECTRICAL & MECHANICAL
Power: 24 VDC @ 50 mA
Current Protection: Automatic Resettable Solid-State Current
Limiters
Circuit Board: Meets IPC Standard
Size (in./ cm.) (LxWxH):
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm.
Shipping Weight: < 2 lbs./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
D2300CPS
2 Fibers
62.5/125m MM
MXL Control Unit MXL Remote
D2300CPS
MXL Remote
D2300CPS
up to 1.9 miles
(3 km)
ifs
ifs
ifs
SYSTEM DESIGN
SPECIFICATIONS
TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]
16 Commerce Road
■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
TECHNICAL SPECIFICATION
RS-485 SIEMENS CERBERUS PYROTRONICS REPEATER
D2300CPS SERIES
Singlemode
9/125µm
1.9 miles (3 km)
6 miles (10 km)
25 miles (40 km)
10 dB
11 dB
D2300CPS
D2320CPS
D2325CPS
20 µw
(-17 dBm)
25 µw
(-16 dBm)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
TRANSCEIVER
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
MODEL
OUTPUT PWR
SENSITIVITY
Multimode
62.5/125µm**
1 µw
(-30 dBm)
850 nm
1310 nm
306
AGENCY COMPLIANCE
MADE IN THE USA
Federal Supply Schedule
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
OVERVIEW
T
he IFS D2300CPS Series data transceiver is designed for full
compatibility with a Cerberus Pyrotronics MXL network and CXL
modem link. The module is UL listed for use in signal system control
unit and burglar alarms unit subassemblies. The transceivers provide
"dr
op & repeat” data transmission of EIARS-485 data signals over two
optical fibers. The module is powered by the 24VDC power supply
within the Siemens Cerberus Pyrotronics panel. Plug-and-play
design ensures ease of installation requiring no electrical or optical
adjustments. Each transceiver incorporates power and transmit/
receive data status indicating LED’s for monitoring proper system
operation. The modules are available in stand-alone version only.
APPLICATION EXAMPLES
• Siemens Cerberus Pyrotronics
• MXL Network (RS-485)
• CXL Modem Link (FSK)
SYSTEM DESIGN