Quick Start Manual

ManualsBrandsInterlogix ManualsVideo recordersDVR 60

Content

Package contents 1

Installation environment 1

Setting up the TVR 60 1

Connecting the devices 2

Turning on and off the TVR 60 2

Operating the TVR 60 3

DDNS settings 5

Live mode 5

Quick Archive 5

Playing back exported DVR format files 6

PTZ mode 6

Logging on 6

Overview of the main menu 6

Setting up IP cameras 7

Setting up alarms 7

Connecting a keypad 8

Viewing an alarm event list 8

Contact information 8

Package contents

The TruVision DVR 60 (model TVR 60) is shipped with

the following items:

• IR (infrared) remote control

• Two AAA batteries for the remote control

• AC power cord (US, Europe, UK)

• USB mouse

• DVR

• TruVision DVR 60 Quick Start Guide

• TruVision DVR 60 User Manual (on CD)

Installation environment

Refer to the user manual for detailed information, but

observe these important requirements:

• Place the TVR 60 in a secure location.

• Ensure that the TVR 60 is in a well-ventilated area.

• Do not expose the unit to rain or moisture.

Setting up the TVR 60

The TVR 60 has an express installation wizard that lets

you easily configure basic DVR settings when first used.

It configures all cameras simultaneously. The

configuration can then be customized as required.

By default, the Setup Wizard initiates once the DVR has

loaded. The Setup Wizard walks you through some of

the more important settings of your DVR. If you do not

wish to use the Setup Wizard at this time, click the

Cancel button. You may also choose to use the Setup

Wizard at a later time by leaving the “Start Wizard when

DVR starts?” checkbox checked.

Any changes you make to a setup configuration screen

are saved when you exit the screen and return to the

main eZ Setup screen.

Recommended steps for setting up the TVR 60:

1. Connect all the devices required to the back panel of

the TVR 60. See Figure 1 on page 2.

2. Set up the TVR 60 with basic settings using the

Setup Wizard.

3. Install the and configure the analog and/or IP

cameras.

4. Configure the system for motion alarms and other

alarm types, as required.

5. Configure the recording, network, HDD and user

settings, as required.

6. Install and configure the keypad.

To quickly put the TVR 60 into operation using Setup

Wizard:

1. Turn on the unit using the power switch on the back

panel. After the boot up screen, the TVR 60 displays

video images on-screen.

2. Select the preferred language for the system.

3. In the eZ Setup screen, click the Next button. In the

User Permission screen enter the default user ID

and password.

TruVision DVR 60 Quick Start Guide

Summary of content (8 pages)

PAGE 1
TruVision DVR 60 Quick Start Guide Content Setting up the TVR 60 Package contents 1 Installation environment 1 Setting up the TVR 60 1 Connecting the devices 2 Turning on and off the TVR 60 2 Operating the TVR 60 3 DDNS settings 5 Live mode 5 Quick Archive 5 Playing back exported DVR format files 6 PTZ mode 6 Logging on 6 Overview of the main menu 6 Setting up IP cameras 7 Setting up alarms 7 Connecting a keypad 8 Viewing an alarm event list 8 Contact information 8 The TVR 60 has an express installation
PAGE 2
User ID: admin Password: 1234 4. Click the Next button and then Enter to open the HDD Management screen. Define the HDD settings as required. Click OK to save and return to the eZ Setup screen. 5. Click the Next button and then Enter to open the Record Settings screen. Define the recording settings such as recording schedules. Click OK to save and return to the eZ Setup screen. 6. Click the Next button and then Enter to open the Network Settings screen.
PAGE 3
Figure 2: Front panel Operating the TVR 60 Item Name Control options Internal: Green indicates the Watchdog is working correctly. Red indicates that the Watchdog is reporting a fault. There are several ways to control the TVR 60: • • • • Description fault. Front panel control IR remote control Mouse toolbar control Web browser control Alarm: Green indicates no external alarm. Red indicates an external alarm status. 8. Alarm button Use to manually acknowledge an alarm. 9.
PAGE 4
Item Name 12. Playback buttons Description : Jumps back to the oldest available video and starts the playback. Move the pointer to a command, option, or button on a screen. Left-click the mouse to confirm a selection. : Pauses playback. See Table 2 below for a description of the mouse buttons. : Instantly plays back the currently selected file. Default time is 1 minute. 13. Menu and Search buttons panel. The mouse is immediately operational and the pointer should appear.
PAGE 5
Figure 3: Web browser interface displayed on-screen, see the TruVision DVR 60 User Manual. Figure 4: Live mode example DDNS settings The DDNS function lets you define the device’s domain name for access through a Web browser. Use the DDNS screen to define the settings for the DDNS function. Viewing in full screen To define the DDNS settings: Press the numeric button on the front panel to switch to the corresponding camera display. For example, press button 10 to view camera 10. 1.
PAGE 6
Playing back exported DVR format files Use the standard file player software to play back the archived video on your PC. It can be downloaded from the TVR 60 when archiving files onto a backup device. PTZ mode PTZ mode lets you control the PTZ operation of the cameras using any TVR 60 user interface. You can control PTZ cameras using the buttons on the front panel and IR remote control or by using the PTZ control buttons on the mouse toolbar. You must have PTZ control access privileges to enter PTZ mode.
PAGE 7
Setting up IP cameras Figure 6: Main menu Use the Camera Management menu to set up IP cameras. All Interlogix IP cameras connected to the same network are listed in the IP camera setup menu. Note: The default IP address for Interlogix IP cameras is 192.0.0.64. Several IP cameras could be detected and listed that may have this same IP address. However, each camera must have a unique IP address in order to function correctly. Change the IP addresses from Camera IP setup menu or from the Web browser.
PAGE 8
10. Click Apply and then OK button to return to the Alarm Management menu. Set the TVR 60 device address in the Display menu and enter “1” as the device address. Set the keypad to zone 1. To set up motion detection alarms: 1. Click the Cameras icon in the main menu. On the Camera Management screen select the camera to configure for motion detection, and then click Setup and Advanced tab to display the Advanced Camera Settings menu. Figure 7: Connecting the KTD-405 keypad 2.