User Manual
Table Of Contents
- Package Contents
- Hardware Description
- Installing the Switch
- Installation Steps
- DIN-Rail Mounting
- Wall Mount Plate Mounting
- Wiring the Power Inputs
- Wiring the Fault Alarm Contact
- Wiring the Digital Inputs / Outputs (GE-DSH-73)
- Installing the SFP transceiver
- Factory Redundant Ring Application
- Transportation Networking and Public Wireless Service
- X-Ring Application
- Coupling Ring Application
- Dual Homing Application
- Connecting to the Console Port
- Login in the Console Interface
- CLI Management
- About Web-based Management
- Requirements
- Logging on the Switch
- System
- Port Management
- Protocol
- Security
- Digital Input/Output (GE-DSH-73)
- Power Over Ethernet (GE-DSH-82-PoE)
- Factory Default
- Save Configuration
- System Reboot
- System Commands Set
- Port Commands Set
- Trunk Commands Set
- VLAN Commands Set
- Spanning Tree Commands Set
- QOS Commands Set
- IGMP Commands Set
- MAC / Filter Table Commands Set
- SNMP Commands Set
- Port Mirroring Commands Set
- 802.1x Commands Set
- TFTP Commands Set
- SystemLog, SMTP and Event Commands Set
- SNTP Commands Set
- X-ring Commands Set
- PoE Command Set
- Address Table
- What is PoE?
- Switch's RJ-45 Pin Assignments
- 10/100Mbps, 10/100Base-TX
Chapter 1: Introduction
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 7
Share Data Buffer 1Mbit
Maximum Frame Size 1522 Bytes packet
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED
Per unit:
Power (Green), Ring
Master (Green), Power
1 (Green), Power 2
(Green), Fault (Red)
8 port 10/100:
Link/Activity (Green),
Full duplex/Collision
(Yellow)
2 SFP port:
LNK/ACT(Green)
2 1000T:
LNK/ACT(Green),
1000M(Green)
Per unit:
Power (Green), Ring
Master (Green), Power 1
(Green), Power 2 (Green),
Fault (Red)
8 port 10/100:
Link/Activity (Green), Full
duplex/Collision (Yellow)
2 SFP port:
LNK/ACT(Green),
2 1000T:
LNK/ACT(Green),
1000M(Green)
PoE:
PoE In-use (Green)
Per unit:
Power (Green), Ring
Master (Green), Power
1 (Green), Power 2
(Green), Fault (Red)
7 port 10/100:
Link/Activity (Green),
Full duplex/Collision
(Yellow)
3 SFP port:
LNK/ACT(Green)
3 1000T:
LNK/ACT(Green),
1000M(Green)
DI/DO ---
2 Digital Input (DI):
Level 0: -30~2V
Level 1: 10~30V
Max. input current: 8mA
2 Digital Output(DO):
Open collector to 40VDC,
200mA
---
ESD Protection 4KV DC 6KV DC 6KV DC
EFT Protection 3KV DC 3KV DC 3KV DC
Console Interface One RJ-45-to –RS-232 male connector for switch management
Power Over Ethernet
PoE Standard ---
IEEE 802.3af PSE (Power
Sourcing Equipment)
---
Units can be Powered --- 8 ---
PoE Power Output ---
48V DC, Max. 15.4 watts,
350mA
---
Power Pin Assignment --- 1/2(+), 3/6(-) ---