User Manual
Table Of Contents
- Package Contents
- Hardware Description
- Installing the Switch
- Installation Steps
- DIN-Rail Mounting
- Wall Mount Plate Mounting
- Wiring the Power Inputs
- Wiring the Fault Alarm Contact
- Wiring the Digital Inputs / Outputs (GE-DSH-73)
- Installing the SFP transceiver
- Factory Redundant Ring Application
- Transportation Networking and Public Wireless Service
- X-Ring Application
- Coupling Ring Application
- Dual Homing Application
- Connecting to the Console Port
- Login in the Console Interface
- CLI Management
- About Web-based Management
- Requirements
- Logging on the Switch
- System
- Port Management
- Protocol
- Security
- Digital Input/Output (GE-DSH-73)
- Power Over Ethernet (GE-DSH-82-PoE)
- Factory Default
- Save Configuration
- System Reboot
- System Commands Set
- Port Commands Set
- Trunk Commands Set
- VLAN Commands Set
- Spanning Tree Commands Set
- QOS Commands Set
- IGMP Commands Set
- MAC / Filter Table Commands Set
- SNMP Commands Set
- Port Mirroring Commands Set
- 802.1x Commands Set
- TFTP Commands Set
- SystemLog, SMTP and Event Commands Set
- SNTP Commands Set
- X-ring Commands Set
- PoE Command Set
- Address Table
- What is PoE?
- Switch's RJ-45 Pin Assignments
- 10/100Mbps, 10/100Base-TX
Chapter 1: Introduction
2 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Package Contents
What’s in the box
Open the Managed Industrial Switch box and carefully unpack it. The box should
contain the following items:
The Managed Industrial Switch
x1
User’s manual on CD
x1
Installation Sheet
x1
RJ-45 to RS-232 Cable
x1
If any of these are missing or damaged, please contact your dealer immediately, if
possible, retain the carton including the original packing material, and use them
again to repack the product in case there is a need to return it to us.
Product Description
Enhanced Reliability for Industrial Networks
The GE Security GE-DSH-82 series Managed Industrial Ethernet Switch with multiple
redundant ring technology is equipped with 8 10/100Mbps Fast Ethernet ports and 2
Gigabit TP/SFP combo interfaces and the GE-DSH-73 is equipped with 7 10/100Mbps
Fast Ethernet ports and 3 Gigabit TP/SFP combo interfaces. All of them are delivered
in a rugged high-strength case. It is an industrially (substation) hardened and fully
managed Ethernet Switch specifically designed to operate reliably in electrically
harsh and climatically demanding environments. The GE-DSH-82 / GE-DSH-73 series
is the most reliable choice for highly managed and Fiber Ethernet applications.
• Wide Range Operating Temperature
• Redundant Ethernet Network
• Manageable
• Power Redundant
• Gigabit / Fiber uplink capability