Data Sheet

IFS
®
Enterprise-
class Gigabit L3
Network Switches
Network Transmission
OVERVIEW
IFS Enterprise-class Network Switches from Interlogix deliver robust
and reliable performance that’s also incredibly easy to use. All switch
management functions are programmable through a user-friendly
web interface.
NS4702 & NS4802 GigE L3 PoE+ Switches
These network switches are engineered to meet a variety of high-
performance applications and are ideally suited for large-scale IP
video surveillance systems. Featuring Layer 3 static-routing, PoE,
and optical trunking ports, these switches offer high performance
features for larger IP video systems.
Powerful PoE+ Support
The NS4702 & NS4802 switches feature IEEE 802.3at Power over
Ethernet (PoE+) and up to 440 Watts (depending on model) of total
power budget. These features allow optimized deployment and
power management of PoE edge devices such as IP surveillance
cameras, access control panels and wireless access points.
Built-in Monitoring, Diagnostics and Trouble-Shooting Tools
These NS4702 & NS4802 switches can can be configured to
monitor the status of a connected PD (Powered Device) in real-time
via IP ping. If a PD (IP Camera, IP Access Reader, IP Intercom, VoIP
phone or Wireless Access Point) no longer responds to a ping, the
switch will cycle PoE power on the port, thus rebooting the PD to
operational status.
Other features for enhanced troubleshooting and management
include PoE monitoring, management and scheduling for energy-
savings, built-in cable diagnostics, and support for SNMP. These
features are designed to reduce IT time and costs while keeping
network downtime to a minimum.
Static Routing
The NS4702 & NS4802 switches support static routing tables,
allowing for complex system architectures with traffic routed
across different domains or between different VLANs. This
enables flexible network design and greater control of network
traffic – essential for modern IP large-scale video systems.
10Gig SFP+ Switch Trunking
The NS4702 & NS4802 switches support 2 or 4 (depending on
model) 10Gig SFP+ slots that are independent and not shared with
the other ports on the switch. These ports provide high-bandwidth
trunking between switches for high performance data transmission
for larger IP video streaming applications. In addition, these ports can
also accept Gigabit fiber or RJ45 SFPs for even more versatility.
Stacking Capability (NS4802-24P-4S-2X only)
The NS4802-24P-4S-2X is managed via a single IP address and
allows up to 16 units to be stacked creating a virtual 384 Port PoE+
switch. This switch also offers added flexibility with full redundancy
options and up to 40Gbps interlink. Without network disruption, the
switches can be “hot swapped” minimizing the impact on network
operations and allowing the network to be upgraded in short notice.
NS4750 GigE L3 Fiber Switch
Engineered to meet the needs of a distributed fiber optic network
system, this Enterprise-Class L3 Network Switch provides a flexible
and economical way to distribute IP video when used with IFS SFP
Media Converters.
Static Routing
The NS4750-24S-4T-4X supports IPv4/IPv6 Layer 3 static routing
to provide a cost-effective solution for network segmentation. This
in turn allows flexible network design and greater control of network
traffic across different domains and VLANs – essential for larger IP
video systems.
10Gig SFP+ Switch Trunking
The NS4750-24S-4T-4X is equipped with 4 10Gig SFP+ slots that
are independent and not shared with the other ports on the switch.
These ports provide high-bandwidth trunking between switches for
high performance data transmission for larger IP video streaming
applications. In addition, these ports can also accept Gigabit fiber
or RJ45 SFPs for even more versatility.
interlogix.com/ifs
NS4750-24S-4T-4X
Layer 3 and 10G SFP+
NS4702-24P-4S-4X
Layer 3 w/PoE-at and 10G SFP+
NS4802-24P-4S-2X
Layer 3 w/PoE-at Stackable
10G SFP+