User Manual User guide
Table Of Contents
- Chapter 1 TVN 20 System Basics
- Chapter 2 TVN Advanced Topics
- HDD Configuration & Management
- Account Management (Users)
- Advanced Camera Settings
- Exception Parameters – System Health Monitoring
- Video Loss
- Remote Record & Video Download
- Additional Network Settings
- Remote Update
- Serial Port Settings – RS-232 & RS-485
- Log Files
- Appendix A Troubleshooting
- Appendix B TVN 20 Specifications
- Appendix C TVN 20 IP Camera Capacities
- Appendix D TVN 20 Supported IP Cameras
- Appendix E TVN 20 USB Archive Options
- Appendix F TruVision Device Finder
- Appendix GGlossary of Terms
- Appendix HWarranty and Support
TruVision NVR 20 User Manual 29
Scheduled Recording Configuration
Follow the steps below to setup scheduled recording:
1. Configure Time-Lapse Recording (Schedule Recording).
2. Configure Motion Activated/Alarm Input Recording Schedules.
Figure 20: Scheduled Record window
The color bands show the enabled recording mode for the camera.
Scheduled = Blue Motion = Yellow Alarm Input Only = Red
Motion OR Alarm = Purple Motion AND Alarm = Light
Blue
Command = Future Use