User Manual User guide
Table Of Contents
- Chapter 1 TVN 20 System Basics
- Chapter 2 TVN Advanced Topics
- HDD Configuration & Management
- Account Management (Users)
- Advanced Camera Settings
- Exception Parameters – System Health Monitoring
- Video Loss
- Remote Record & Video Download
- Additional Network Settings
- Remote Update
- Serial Port Settings – RS-232 & RS-485
- Log Files
- Appendix A Troubleshooting
- Appendix B TVN 20 Specifications
- Appendix C TVN 20 IP Camera Capacities
- Appendix D TVN 20 Supported IP Cameras
- Appendix E TVN 20 USB Archive Options
- Appendix F TruVision Device Finder
- Appendix GGlossary of Terms
- Appendix HWarranty and Support
50 TruVision NVR 20 User Manual
Live Viewing and Playback Viewing from the
Browser
The Live Viewing Browser Page
Figure 30: Live Viewing Browser Page
9
10
2 3 4 5 6 7 8
11
12
1
Table 4: Live Viewing Features
Item Name Description
1. Connection
Tree
The left hand panel shows the configured IP cameras on the TVN 20.
Clicking on an individual camera’s arrow icon will load it into the current
display window. Depending on the image size and mega pixel rating of
the camera, loading the camera may take several moments.
2. Live Display
modes
The user can display cameras live in a 1-Up, 4-Up and 9-Up View. In a
multi-screen mode, the user can simply click the TVN 20 device icon at
the top of the camera list to automatically load as many cameras in the
display (4 in 4-Up, and 9 in 9-Up).
To load a camera into a specific tile of a multi-up display, the user just
highlights the tile and then clicks the desired camera in the list.
3. Stop
Streaming
Stops all streaming
4. Capture Takes a snapshot of the currently highlight camera and saves it to the
local browser PC.
5. Start
Recording
Allows local PC recording of all cameras active in the display.