Installation Guide

Table Of Contents

Mounting

Before mounting a camera:

 Ensure that all the related equipment is powered off during the

physical installation/camera mounting.

 Ensure that the wall or ceiling is strong enough to withstand

four times the weight of the camera assembly.

Bullet Camera

To mount the bullet camera on a wall or ceiling:

1. Drill the holes for the mounting hardware in the mounting

surface using the supplied drill template. To route the cables

from the base of the camera, drill a cable access hole in the

mounting surface.

Ceiling Mounting

Hole

2. Route network cables to the mounting location as needed.

3. Secure the camera to the wall or ceiling with the supplied

screws.

4. Connect the power cable and video output cable as needed.

5. Adjust the lens by doing the following:

a. Loosen the adjustable nut.