Installation Guide
Table Of Contents
- Product overview
- Installation environment
- Package contents
- Camera description – Bullet Camera
- Camera description – Desktop Camera
- Accessing the Micro SD card
- Mounting
- Browser requirements
- Quick setup
- Alternative methods of adding cameras
- UltraSync app basic functions
- Change default camera settings
- Reset cameras to factory default
- Troubleshooting
- Specifications
Desktop Camera
To mount the desktop camera on a magnetic surface:
Place the base of the camera on a magnetic surface to hold the
camera in place.
WARNING: Magnetic fields can erase data on a credit card and
cause damage to cell phones and hard drives.
To mount the desktop camera on a wall or ceiling:
1. Drill the screw holes according to the drill template.
2. Disassemble the three-axis bracket. Hold the base (2) with
one hand, and rotate the pole (1) counter-clockwise to
disassemble the pole from the base.
3. Mount the fixed tray (item 3 in step 2) to the ceiling or wall with
the supplied screws.
12 P/N 466-5303-EN • REV A • ISS 25MAY17 © 2017 United Technologies Corporation. All rights reserved.