Installation Guide
Table Of Contents
- Product overview
- Installation environment
- Package contents
- Camera description – Bullet Camera
- Camera description – Desktop Camera
- Accessing the Micro SD card
- Mounting
- Browser requirements
- Quick setup
- Alternative methods of adding cameras
- UltraSync app basic functions
- Change default camera settings
- Reset cameras to factory default
- Troubleshooting
- Specifications
4. Install the base on the fixed tray.
5. Install the camera on the bracket.
6. Adjust the camera angle by doing the following:
a. Loosen the knob (1) to adjust the panning position and
tilting position.
b. When finished adjusting the camera angle, fasten the knob.
Browser requirements
The following browsers are supported for camera setup:
Internet Explorer 8 or later
Safari 5 or later
P/N 466-5303-EN • REV A • ISS 25MAY17 © 2017 United Technologies Corporation. All rights reserved. 13