Installation Guide

Table Of Contents

85+ – Excellent:

No additional actions needed and default video resolutions

settings may be increased if required.

75-85 – Very Good:

No additional actions are required to increase signal strength. It is

not recommended to increase video resolution settings.

65-75 – Good:

We recommend using a Wi-Fi repeater or powerline adapter to

increase signal strength. Alternatively, video resolutions settings

may be reduced to minimize poor video quality.

Below 65 – Poor:

We do not recommend using a camera with a signal strength

below 65. Video streams are not likely to work below this level. A

Wi-Fi repeater or powerline adapter should be used to increase

signal strength.

2. Add cameras to a Wi-Fi network

RECOMMENDED METHOD

(use a temporary Wi-Fi connection for setup)

Note: We highly recommended using a dedicated router for all

UltraSync installations that include cameras for the following

reasons:

 To avoid service calls from homeowners as a result of

changing their Wi-Fi password.

 To maintain privacy of the homeowner’s Wi-Fi network

password.

 To reduce the risk of local communication issues between the

router, cameras, and UltraSync panels.

Note: While the steps below are followed, the camera cannot be

accessed by users other than the user performing the setup.

1. Apply power to the camera using the included power supply.