Installation Guide
Table Of Contents
- Product overview
- Installation environment
- Package contents
- Camera description – Bullet Camera
- Camera description – Desktop Camera
- Accessing the Micro SD card
- Mounting
- Browser requirements
- Quick setup
- Alternative methods of adding cameras
- UltraSync app basic functions
- Change default camera settings
- Reset cameras to factory default
- Troubleshooting
- Specifications
11. Scroll down and click or tap the Save button on the bottom of
the screen.
Note: Do not select Connect in the WPS Section.
12. Repeat steps 9-11 above to add any additional cameras.
13.Connect the setup device to the wireless network selected in
step 9.
Network connection via Wi-Fi is now complete!
3. Add cameras to UltraSync
Ensure the proper installation of camera hardware and follow the
instructions in “Add cameras to a Wi-Fi network” on page 15
before adding cameras to UltraSync.
Note: Make sure the camera and UltraSync intrusion panel are on
the same local area network. Applications where the intrusion
panels use cellular only (no Wi-Fi or Ethernet connection) are not
compatible with this camera.
Note: For detailed information on how to set up the UltraSync
app, add locations, and log in as an installer, see the UltraSync
Hub Reference Guide.
1. Using an iOS or Android device, open the UltraSync app and
log in to the site as the installer.
2. Tap the menu icon at the top left of the screen, and then tap
Settings.
3. Tap Cameras in the Settings Selector drop-down list.
4. Tap Scan for New Cameras.
P/N 466-5303-EN • REV A • ISS 25MAY17 © 2017 United Technologies Corporation. All rights reserved. 17