Installation Guide
Table Of Contents
- Product overview
- Installation environment
- Package contents
- Camera description – Bullet Camera
- Camera description – Desktop Camera
- Accessing the Micro SD card
- Mounting
- Browser requirements
- Quick setup
- Alternative methods of adding cameras
- UltraSync app basic functions
- Change default camera settings
- Reset cameras to factory default
- Troubleshooting
- Specifications
3. Select the Scene to Configure drop-down list and type a
Scene Name.
4. Make Scene Trigger selections as shown below (select an
installed sensor from the Activate Sensor drop-down list).
5. Make Scene Result selections as shown below (select the
Camera(s) to begin recording when the scene is triggered)
Select Alarm System from the Device drop-down list.
Clips are recorded on the Micro SD card installed in the
camera and are linked to events in History.
P/N 466-5303-EN • REV A • ISS 25MAY17 © 2017 United Technologies Corporation. All rights reserved. 21