Installation Guide
Table Of Contents
- Product overview
- Installation environment
- Package contents
- Camera description – Bullet Camera
- Camera description – Desktop Camera
- Accessing the Micro SD card
- Mounting
- Browser requirements
- Quick setup
- Alternative methods of adding cameras
- UltraSync app basic functions
- Change default camera settings
- Reset cameras to factory default
- Troubleshooting
- Specifications
View event triggered clips in History
Note: UltraSync installer privileges are required to view event
triggered camera clips in History.
1. Tap the menu icon at the top left of the screen, and then tap
History.
2. Make Event History selections from the Select Date and
Event Filter drop-down lists.
3. Find an event for viewing by tapping the Oldest, Prev, Next,
and Latest buttons.
4. Scroll to the tile containing the video event and tap it to play
video.
Removing cameras from UltraSync
To remove a single camera:
1. Tap the menu icon at the top left of the screen, and then tap
Settings.
2. Tap Cameras under the Settings Selector drop-down list.
3. Scroll to the camera to be removed and tap Remove.
4. Click Save.
To remove all cameras:
1. Tap the menu icon at the top left of the screen, and then tap
Advanced.
2. Tap Shorcut.
3. Type SHORTCUT 910.22 and tap OK.
22 P/N 466-5303-EN • REV A • ISS 25MAY17 © 2017 United Technologies Corporation. All rights reserved.