TruPortal™ Access control that easily integrates into the modern world QUICK START GUIDE
Introduction TruPortal™ access control solutions have been engineered and designed to install quickly and easily right out of the box. These units are ideal for small- to mid-size applications, with a user-friendly Installation Wizard feature to assist with each step. We’ve made configuring TruPortal solutions simple and efficient for you, and intuitive and convenient for your customers. This quick start guide provides easy-to-follow instructions to get your installation started.
TruPortal System Architecture TCP/IP NETWORK RS-485 SNAPP System Controller Door Door Reader Reader Reader Reader Digital Video Recorders Input/Output Expansion Module Power Supply & Battery RS-485 SNAPP IPSDC Dual Door Interface Module Door Door Door Reader Reader Reader Reader Reader Reader Power Supply & Battery Note: Use of PoE configuration has not been evaluated by UL.
STEP 1 Install Hardware 1.
1.2 Connect RS-485 bus between System Controller and RS-485 based Add-ons RS-485 Bus System Controller Door Controller • There are four independent RS-485 buses. You can use any or all of the four buses.
STEP 1 Install Hardware 1.
1.
STEP 2 Configure Networking 2.1 Run “Discovery and Installation Wizard” • You can also use the “Direct-connect method” from step 1.3 and then login via your Web browser to http://169.254.1.200 to complete step 2.2 • Default username and password for either method is “admin” and “demo” • Insert CD into PC and double-click on “Start.hta” if CD does not Autorun • If necessary, install .NET 4.
2.2 Change IP address settings (DHCP to Fixed) • The “Discovery and Installation Wizard” will identify the System Controller connected to the local network or directly to the PC. IP door controllers and other add-ons are not discoverable with this tool. See step 2.3 • (Recommended) Change the default password for the Administrator account • Synchronize the date and time on the System Controller with the PC and finalize IP Networking settings.
STEP 2 Configure Networking 2.3 Configure Networking on IP-based 1-Door Add-ons Before you start: • All IPSDCs have the same default IP address of 192.168.6.6. During initial setup, only connect one IPSDC at a time to the network to avoid addressing conflicts • Make sure your PC/laptop will be able to connect to 192.168.6.
Use the Integrated Configuration Tool (ICT): • Point your Web browser at http://192.168.6.6. (Note: default user name for logging in is “install” and the password is “install”) • Configure the correct IP address for this IPSDC. Static IP recommended (Controller Parameters => Primary Network) • Enter the IP address of your TruPortal System Controller (the one chosen during Step 2.2).
STEP 3 Configure Software 3.1 Log-in via Web browser • Use your Web browser to navigate to the IP address configured in Step 2.
3.
STEP 3 Configure Software 3.3 Use Wizards to add persons, credentials, access levels, schedules, etc. • From Home screen, click Add Person to launch the Add Person Wizard.
3.4 Check for firmware updates (recommended) • This step is optional but recommended to ensure that the latest firmware is loaded • From the navigation menu, click System Administration, then Firmware Updates.
NOTES Use this area to record important information, including username and password.
Document the physical location of each device by serial number As each door configuration (locks, sensors, readers) is installed, provide a description for each, and list the serial numbers of devices associated with each door. This will assist you later when performing the detailed configuration, naming the devices, reader groups and areas when you configure the devices on the System Controller.
NOTES Notes: _______________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ___________________________________
Notes: _______________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ ______________________________________________ __________________________________________
North America T 855-286-8889 Asia T 852-2907-8108 interlogix.com Australia T 61-3-9239-1200 Specifications subject to change without notice. Europe T 32-2-725-11-20 © 2014 United Technologies Corporation. All rights reserved. Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation.