Configuration Manual Instruction Manual

TruVision 360° Camera Configuration Manual 27
Exception alarms
You can set up the camera to notify you when irregular events occur and how you
should be notified. These exception alarms include:
• HDD Full: All recording space of NAS is full.
• HDD Error: Errors occurred while files were being written to the storage, no storage
or storage had failed to initialize.
• Network Disconnected: Disconnected network cable.
• IP Address Conflicted: Conflict in IP address setting.
• Invalid Login: Wrong user ID or password used to login to the cameras.
Figure 13: Exception menu
To define exception alarms:
1. Click Configuration > Events > Exception.
2. Under Exception Type, select an exception type from the drop-down list.
3. Check the checkbox to select the desired linkage method.
4. Click Save to save changes.
Snapshot parameters
You can configure scheduled snapshots and event-triggered snapshots. The captured
snapshots can be stored in the SD card (if supported) or the NAS. You can also upload
the snapshots to an FTP server.