Configuration Manual Instruction Manual

Chapter 2: Programming
8 TruVision Analog PTZ Camera Configuration Manual
2. Enter/Exit: In the live view window, click IRIS+ to enter a submenu. Move the cursor to
Exit and click IRIS+ to exit.
To select and change an item in a menu:
1. Move the cursor to the target item and click the IRIS+ button.
2. Click the UP/DOWN or LEFT/RIGHT buttons in the PTZ control panel to choose the
value from the selectable value list.
3. Click IRIS+ to confirm the change, or click IRIS- to cancel and restore the original value.
View system information
The System Information menu displays the current system information of the PTZ camera,
including model number, address, protocol, etc.
Figure 1: System information
Note: The information displayed cannot be edited. The temperature shown refers to the
internal temperature.
To view the system information:
1. Go to Main Menu >System Information. The System Information menu appears.
Change system settings
System information settings
You can check and edit the system settings on address, communication, protocol, time, etc.
in the System Information Settings menu.