Configuration Manual Instruction Manual

Chapter 2: Programming
24 TruVision Analog PTZ Camera Configuration Manual
To edit a preset tour:
1. Go to MAIN MENU > SYSTEM SETTINGS > PRESET TOUR
2. Move the cursor to EDIT TOUR NUMBER and click IRIS+ to enter edit mode.
3. Click up/down direction buttons to position the preset to be edited.
4. Click left/right buttons to position the cursor at PRESET, DWELL TIME and SPEED of a
preset. Click the up and down direction buttons to set each value.
Note: Use defined presets when setting a preset tour.
Dwell time is the time that the PTZ camera pauses on the certain preset. Select a value
between 0 and 30 seconds.
Speed is the preset tour speed of the PTZ camera when it switches between presets.
Select a level between 1 and 40. See Table 3 below.
5. Repeat steps 3 and 4 to define other presets for the selected preset tour. Press IRIS+ to
save the current settings or press IRIS- to cancel and return to the previous menu.
Table 3: Preset tour speeds
Level
Speed(°/s) Level Speed(°/s) Level Speed(°/s)
1
0.3 2 2 3 4
4
6 5 8 6 10
7
12 8 14 9 16
10
18 11 20 12 25
13
30 14 35 15 40
16
45 17 50 18 55
19
60 20 65 21 70
22
80 23 90 24 100
25
110 26 120 27 130
28
140 29 150 30 160
31
170 32 190 33 210