Configuration Manual Instruction Manual

Chapter 2: Programming
26 TruVision Analog PTZ Camera Configuration Manual
To set a shadow tour:
1. Go to MAIN MENU > SYSTEM SETTINGS > SHADOW TOUR.
2. Move the cursor to SHADOW TOUR NUMBER and click IRIS+ to enter edit mode.
3. Click the up and down buttons to select the number of the shadow tour to be configured.
4. Click IRIS+ again to confirm.
Note: You can configure up to four shadow tours.
To edit a shadow tour:
1. Go to MAIN MENU > SYSTEM SETTINGS > SHADOW TOUR.
2. Move the cursor to SHADOW TOUR RECORD and click IRIS+ to enter edit mode.
3. Move the cursor to SHADOW TOUR RECORD and click IRIS+ to enter edit mode.
4. Click the PTZ control buttons and direction buttons to pan, tilt, or zoom in/out the PTZ
camera to draw a movement path. The PTZ camera can automatically memorize the
path you operated as a Shadow Tour.
5. Click IRIS+ again to save the Shadow Tour and exit edit mode.
Notes:
• REMAINING shows the remaining memory of the PTZ camera to configure the shadow
tours. When it reaches 0, no more shadow tours can be configured. You can also see
the remaining memory under SHADOW TOUR menu listed under REMAINING.
• The panning/tilting movements and the lens operations cannot be memorized
simultaneously.
To preview a shadow tour:
1. Go to MAIN MENU > SYSTEM SETTINGS > SHADOW TOUR.
2. Move the cursor to PREVIEW SHADOW TOUR.