Configuration Manual Instruction Manual

Chapter 2: Programming
28 TruVision Analog PTZ Camera Configuration Manual
Note: You can configure up to eight tasks.
To set a task status:
1. Go to MAIN MENU > SYSTEM SETTINGS > SCHEDULE.
2. Move the cursor to STATUS and click IRIS+ to enter edit mode
3. Click the up and down buttons to set the task status to ON.
4. Click IRIS+ again to confirm and exit edit mode of this column.
To set a task action:
1. Go to MAIN MENU > SYSTEM SETTINGS > SCHEDULE.
2. Move the cursor to ACTION and click IRIS+ to enter edit mode
3. Click the up and down buttons to select a task action from the list: Preset 1-8, Shadow
Tour 1-4, Preset Tour 1-8, Panning scan, Tilting scan, Random scan, Frame scan,
Panoramic scan, Day mode, Night mode, Zero calibr or None.
4. Click IRIS+ again to confirm and exit edit mode of this column.
To set a task time:
1. Go to MAIN MENU > SYSTEM SETTINGS > SCHEDULE.
2. Move the cursor to TIME and click IRIS+ to enter edit mode
3. Click the up and down buttons to position the cursor at WEEK, START (H-M) and END
(H-M).
Note: The weekday can be set to be from Monday to Sunday, or Whole Week.
4. Click the up and down buttons to select the specific day and time.
5. Click IRIS+ to confirm and exit.