Configuration Manual Instruction Manual

Chapter 2: Programming
TruVision Analog PTZ Camera Configuration Manual 35
To set tracking:
1. Go to MAIN MENU > SYSTEM SETTINGS > TRACKING.
2. Click IRIS+ to enter edit mode.
3. Move the cursor on ENABLE TRACKING and click up/down buttons to enable tracking.
4. Click the right button to move the cursor to TRACKING ZOOM and click IRIS+.
5. Click ZOOM+ or ZOOM- to change the zoom you want.
6. Click IRIS+ to save the changes.
Restore default camera settings
You can reset all camera settings to factory default parameters.
Note: Camera settings are mainly of PTZ parameters and alarm parameters, and also
include some system settings, e.g. camera address.
To restore default settings:
1. Go to MAIN MENU > RESET CAMERA.
2. Click IRIS+ to restore the camera settings to the default value or click IRIS- to exit.
Reboot the camera
Enter MAIN MENU > REBOOT SYSTEM and click IRIS+ to reboot the PTZ camera
remotely.