Configuration Manual Instruction Manual

Chapter 1: Introduction
6 TruVision Analog PTZ Camera Configuration Manual
System-defined presets
The camera has some system-defined presets with special functions. These
presets cannot be edited but can be called through a control device, such as a
DVR or keypad. Please refer to below table for details.
Table 1: Predefined presets
Preset N
o. Function Preset No. Function
33
Auto-flip 93 Set manual limit stops
34
Return to home position 94 Remote reboot
35
Preset Tour 1 95 Access main menu
36
Preset Tour 2 96 Stop scanning
37
Preset Tour 3 97 Start random scanning
38
Preset Tour 4 98 Start frame scanning
39
IR cut filter in 99 Start pan scanning
40
IR cut filter out 100 Start tilt scanning
41
Shadow Tour 1 101 Start panorama scanning
42
Shadow Tour 2 102 Preset Tour 5
43
Shadow Tour 3 103 Preset Tour 6
44
Shadow Tour 4 104 Preset Tour 7
92
Enable limit stops 105 Preset Tour 8
Note: Please ensure that the baud rate, data bit, and address have been
configured for the camera are the same as those in the control device.