Configuration Manual Owner manual

56 TruVision 12/32 Series IP Camera Configuration Manual
To define RTSP authentication:
1. From the menu toolbar, click Configuration > Security > RTSP Authentication.
2. Select the Authentication type Enable or Disable in the drop-down list to enable or
disable the RTSP authentication.
3. Click Save to save the changes.
IP address filter
This function allows you to give or deny access rights to defined IP addresses. For
example, the camera is configured so that only the IP address of the server hosting the
video management software is allowed to be accessed.
Figure 23: IP address filter window
To define IP Address Filter:
1. From the menu toolbar, click Configuration > Security > IP Address Filter.
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the drop-down list: Forbidden or Allowed.
4. Click Add to add an IP address.
5. Click Modify or Delete to modify or delete the selected IP address.
6. Click Clear to delete all the IP addresses.
7. Click Save to save the changes.