Configuration Manual Owner manual

TruVision 12/32 Series IP Camera Configuration Manual 59
4. Click Update. You will receive a prompt asking you to reboot the camera.
5. When the upgrade is finished, the device will reboot automatically. The browser will
also be refreshed.
To upgrade the firmware via TruVision Device Manager:
1. In the FW upgrader panel, select a device or hold the Ctrl or Shift key to select
multiple devices for simultaneous upgrading.
2. Click the browse button to locate the firmware file to use.
If you want the device to automatically reboot after the upgrade, check Reboot the
device after upgrading. When checked, it will also display Restore default
settings option. Check it if you want to restore all parameters.
3. Click Upgrade.
4. When the upgrading is completed, the updated version information on the devices is
listed.