Configuration Manual Owner's manual

2BChapter 3: Camera configuration
TruVision IP PTZ Camera Configuration Manual 19
Figure 6: Camera image settings menu
Table 6: Image parameters
No.
Parameter
Description
1.
Brightness
, Contrast
S
aturation, Sharpness
Modifies the different elements of picture quality by adjusting
the position of the values for each of parameter.
2.
Limit Gain
This feature is used to adjust gain of the image. The value
ranges from 0 to 100.
3.
Focus Mode
The Focus Mode can be set to Auto, Manual, and Semi-auto.
Auto: The camera focuses automatically at any time
according to objects in the scene.
Semi-auto: The camera focuses automatically only once
after panning, tilting and zooming.
Manual: You need to use zoom button on the control panel
to focus manually.
4.
Minimum Focusing
This function is used to limit the minimum focus distance. The
value can be set to 1.5m, 3m, 6m, 10cm and 50cm.
5.
Exposure
Mode
The Exposure Mode can be set to Auto, Iris Priority, Shutter
Priority, and Manual.
Auto: The iris, shutter and gain values will be adjusted
automatically according to the brightness of the environment.
Iris Priority:
The value of iris needs to be adjusted manually.
The shutter and gain values will be adjusted automatically
according to the brightness of the environment.
Shutter Priority: The value of shutter needs to be adjusted
manually. The iris and gain values will be adjusted
automatically according to the brightness of the environment.
Manual: You can adjust the values of Gain, Shutter, and Iris
manually.
6.
Video Standar
d The camera cannot auto-sense the power supply.
Select 50 Hz (PAL) or 60 Hz (NTSC) depending on your
region.