Configuration Manual Owner's manual
Table Of Contents
- Chapter 1Introduction
- Chapter 2Network connection
- Chapter 3Camera configuration
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD
- Overlay text
- ROI encoding of an image
- Intelligent tracking
- PTZ parameters
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Video loss alarms
- Snapshot parameters
- NAS settings
- Format storage devices
- Recording schedule
- Chapter 4Camera management
- Chapter 5Camera operation
- Index
TruVision IP PTZ Camera Configuration Manual 3
Chapter 2
Network connection
This manual explains how to configure the camera over the network with a web
browser.
TruVision IP PTZ cameras can be configured and controlled using Microsoft
Internet Explorer (IE) and other browsers. The procedures described use
Microsoft Internet Explorer (IE) web browser.
Checking your web browser security level
When using the web browser interface, you can install ActiveX controls to
connect and view video using Internet Explorer. However, you cannot download
data, such as video and images due to the increased security measure.
Consequently you should check the security level of your PC so that you are able
to interact with the cameras over the web and, if necessary, modify the Active X
settings.
Configuring IE ActiveX controls
You should confirm the ActiveX settings of your web browser.
To change the web browser’s security level:
1. In Internet Explorer click Internet Options on the Tools menu.
2. On the Security tab, click the zone to which you want to assign a web site
under “Select a web content zone to specify its security settings”.
3. Click Custom Level.