Configuration Manual User guide

1BChapter 2: Camera operation
30 TruVision IP Camera Configuration Manual
time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s, 25 s, 30 s or not
limited.
Post- record time
The post-record time is set to stop recording after the scheduled time or the
event. For example, if an alarm triggered recording ends at 11:00, and the post-
record time is set as 5 seconds, the camera records until 11:00:05. The post-
record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min.
To set up a recording schedule:
1. In the Storage folder, click the Record Schedule subfolder to open its
window.
2. Click the Enable Record Schedule box to enable recording.
Note: To disable recording, deselect the option.
3. Click Edit to edit the recording schedule. The following window appears:
4. Select whether the recording will be for the whole week (All Day recording) or
for specific days of the week.
If you have selected “All day”, select one of the record types to record from
the drop-down list box:
• Normal: This is continuous recording.
• Motion detection: The video is recorded when the motion is detected.
• Alarm: The video is recorded when the alarm is triggered via the external
alarm input.
• Motion | Alarm: The video is recorded when the external alarm is
triggered or the motion is detected.
• Motion & Alarm: The video is recorded when motion and alarms are
triggered at the same time.