User Manual Owner manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Installation environment
- Package contents
- Cable requirements
- Camera descriptions
- Setting up the camera
- Connecting the devices
- Accessing the SDHC card
- Mounting the dome cameras on a ceiling
- Mounting the bullet camera
- Using the camera with TVR 60/ TVN 20/ TVN 40/ LNVR and other systems
- Using the camera with TruVision Navigator
- Chapter 3 Network and streaming configuration
- Chapter 4 Camera configuration
- Chapter 5 Camera management
- Chapter 6 Camera operation
- Appendix A Specifications
- Appendix B Pin definitions
- Index
2BChapter 3: Network and streaming configuring
TruVision Outdoor IP Camera User Manual 21
Parameters
Description
Transmission performance
Specifies the transmission speed.
Options include: Shortest delay mode, good real time, normal real
time and fluency, and good fluency.
Save record file
as Specifies the directory for recorded files. The default directory is
C:\Program Data\Web\RecordFiles.
Save captured picture as
Specifies the directory for saving snapshot files. The default
directory is C:\Program Data\Web\BMPCaptureFiles.
Save
playback captured
picture as
Specifies the directory for saving playback files. The default
directory is C:\Program Data\Web\PlaybackFiles.
Save download file as
Specifies the directory for downloaded files. The default directory is
C:\Program Data\Web\DownloadFiles.
Remote configuration
Use the “Remote configuration” panel to remotely configure the server, network,
camera, alarms, users, transactions and other parameters such as upgrading the
firmware. See Figure 7 and Table 3 for descriptions of the configuration folders
available.
Figure 7: Remote configuration panel (Basic information menu selected)
Table 3: Overview of the Remote configuration panel
Configuration folders
Description
Basic information
Defines the camera name and RS-485 bus ID. This window
also displays the MAC address, device type, device SN and
the current firmware version. See “Information about the
camera” on page 22.
Channel parameters
Defines the OSD properties of camera information, recording
parameters and schedules, motion detection parameters,
image quality, alarm responses, and overlay text. See
“Camera configuration” on page 25.