User Manual Owner manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Installation environment
- Package contents
- Cable requirements
- Camera descriptions
- Setting up the camera
- Connecting the devices
- Accessing the SDHC card
- Mounting the dome cameras on a ceiling
- Mounting the bullet camera
- Using the camera with TVR 60/ TVN 20/ TVN 40/ LNVR and other systems
- Using the camera with TruVision Navigator
- Chapter 3 Network and streaming configuration
- Chapter 4 Camera configuration
- Chapter 5 Camera management
- Chapter 6 Camera operation
- Appendix A Specifications
- Appendix B Pin definitions
- Index
4BChapter 5: Camera management
TruVision Outdoor IP Camera User Manual 41
To upgrade the firmware through the Web browser:
1. Download on to your computer the latest firmware from our web site at:
www.utcfssecurityproductspages.eu/videoupgrades/
2. In the “Remote configuration” folder select the subfolder “Remotely upgrade”
to open the “Remotely upgrade” window.
3. Click the Browse button to locate the latest digicap.DAV file on your
computer.
4. Click Update. You will receive a prompt asking you to reboot the camera.
Rebooting the camera
The camera can be easily rebooted remotely.
Click the folder Reboot device to open its window. Click OK to the question
“Restart the device?” The camera reboots.